FAQ  •  Register  •  Login

Haypi Kingdom 3.3.Beta Bug Compilation

Moderators: support1, support9

<<

Ch@oS

Newbie

Posts: 9

Joined: Sun May 01, 2011 8:50 pm

Post Sat Jul 28, 2012 3:00 am

Haypi Kingdom 3.3.Beta Bug Compilation

 Alright so in my first few hours of gameplay with the new 3.3 Beta, I encountered several errors, but instead of reporting them one by one I've decided to compile them into one massive bug report.

I play on a Samsung Galaxy Ace, however my phone is non-rooted and runs Android 2.3.5 so I am unable to take screenshots (without purchasing an application to take them for me). So instead I will try and give extensive and detailed descriptions with regards to the bugs I have found.

Firstly, I don't know if this is only for my phone but I suspect not- 'Tina' the tutorial has some serious bugs... First and foremost, most of the messages that I have read are only half finished, and just stop in random places. When you then hit "Next Step" it goes on to the next step and whatever was being said previously is just forgotten, and there is no scroll bar to scroll down the message and let 'Tina' finish. Here are some examples of this:

"You have received some rewards since you have successfully accomplished the task to upgrade corpland and therefore you have been rewarded. There are many tasks like" -and it just ends there. When you hit 'Next Step' it just moves onto a different task.

"When you finish training your troops, let me show you how to hunt and explore the world you're playing in. There are more corplands, lumber mills, sone mines, iron" -and again it just ends there.

"Now you can distribute attribute points and skill points, which will have a significant impact on your kingdom development. They are: Attack, defence, speed, fortune," -and once again it just ends there.

However, most disturbingly, and I don't know if this is perhaps an error I have made, but right after that previous task, I pressed 'Next Step', and 'Tina' then flickered, and dissappeared. Since then, 'Tina' has not reappeared to finish the tutorial.

Moving on from the 'Tina' bugs I have compiled, the Map seems to have some issues with its alignment. For example, and I see others have noticed this, the Map is centered in the Top and Center of the page, as opposed to in the Tan area in the Middle and Center of the page. Furthermore, down the bottom where it gives the details of whichever square you have selected there are more bugs to be found:

Due to the length of player names, sometimes the name of the 'Owner' can be crammed into, behind or infront of the word 'Position'. For example, when I look at my main city it says the following:

Owner: Ch@oSPosition
 [109:3]

This is the same for others, for example, SirFair.'s Main City says this:

Owner: SirFair.Position [31:4]

Thirdly, no matter which block of land I look at, on my screen the 'Distance' line is half cut off, so I can only see the top half of the word 'Distance:' and I can only see the top half of the numbers. The bottom half seem to be covered by a piece of Tan coloured block, for some reason. Perhaps my screen is just not big enough, but either way I can't properly read the Distance whenever I veiw the Map.

Moving on, one of the more amusing glitches that I have found is this: My main account, Ch@oS
, on S124, has a donator medal of '3', and obviously on the beta server, my account should have a donator medal of '0', however I had regular Haypi open at the same time of Beta Haypi, and when I closed regular haypi, all of a sudden my Level 3 Donator Medal had carried across to my Beta account. I still had 0/15000 donation points, but when I posted in the World Chat, I had a Level 3 Donator Medal next to my name. Everyone was wondering how it had gotten there.

Now I shall list exactly what happened to get to this point: 

Haypi 3.3.Beta Opened > Haypi 3.3.Beta Minimised > Regular Haypi Opened > Regular Haypi Closed > Haypi 3.3.Beta Maximised > Level 3 Donator Medal appears in Chat

And that was pretty much it. 

So, moving on, another bug that I have observed is the ranking system. In both the tab 'Prestige' and the tab 'Title' it seems to lag when it displays my rank. 
An example of this was last night, I checked the ranks in the prestige tab, and it said: 'Ch@oS
 's ranking: 297' however, I went and checked, and Rank 297 was support__1000. However, I scrolled up a little bit, and I was actually Rank 182, with 54 Prestige. I went and checked in the 'Title' tab, and it was exactly the same, it stated that I was Rank 297, yet I was actually at Rank 182. Another little bug with the Ranking system is the way it displays what rank you are. It says, "Ch@oS
 's ranking: ###" however, if it were grammatically correct it should say, "Ch@oS'
 ranking: ###" and furthermore, there is for some reason a space between "Ch@oS
" and " 's". Another little bug that needs to be fixed up.

Another little bug that I've noticed is that when I close Haypi 3.3.Beta, it briefly flickers to the Startup screen (The screen that says "Haypi Kingdom" followed by the three buttons "START GAME", "MY ACCOUNT" and "Visit Haypi.Com"). Now I'm sure it should just close like Regular Haypi, but for some reason it flickers to the startup screen for a few secconds.

Finally, now this bug baffled me, I upgraded Stone Mine 1 to Level 1, and completed the task "Upgrade Stone Mine", however a little while later, I came back to upgrade another stone mine, and Stone Mine 1 had reverted to Level 0. Even though I had completed the task, and watched it upgrade to Level 1, it had reverted to Level 0.

Again, my apologies for the lack of screenshots, but I am physically unable to take them on my phone. I hope that this report will be of some use.

Cheers,
~Ch@oS.
<<

Ch@oS

Newbie

Posts: 9

Joined: Sun May 01, 2011 8:50 pm

Post Mon Jul 30, 2012 7:31 am

Re: Haypi Kingdom 3.3.Beta Bug Compilation

Some more bugs-

Recently I reached the rank of 3rd Baron, and this was the message that was displayed:

"Congratulations! You are newly 
promoted to Third-class Baron! So 
far you may have gained more 
knowledge about Haypi Kingdom 
and are willing to write something 
about the game. 

Your remarks may be viewed by 
numerous visitors of Marked, thus 
referential to them. We appreciate"

However, it ended at "We appreciate", and it would not let me scroll down. Furthermore, the bottom half of the entire bottom line was cut off. Once again, I think this is a case of a missing scroll bar.

Another bug- When I am attacking others, no matter what alliance they are from, there is for some reason a 10 minute buffer in between attacks.

For example; My main city is at [109:3]. I sent an attack to [112:6] and it took 1:34. I then sent another attack (simultaneously) to [108:6] and it took 11:34. I thought this was a little odd, so once my attack on [112:6] had concluded, I sent an attack to [109:4], and as I already had an attack going that was approximately 8 minutes away, this new attack I sent was at 18:00 minutes. So in essence, whenever I send an attack, if I already have 1 attack going, it just adds 10 minutes to the amount of time left on the first attack, and makes that the time for the second attack.

A third bug, is that I don't think the Beginner Protection is working properly. While you can not attack others while you are in BP, it seems that once you are out of BP you can attack everyone, even if they are still in BP. This is, I must say, quite handy for hitting people that are Level 0 in the first few days, however I'm sure it must be a bug. 

For example; I received the 3.3.Beta email on Friday Afternoon, AEST, and it is currently Saturday Evening, AEST. This means that for sure the Beta can not have been released for more than about 60 hours, however I can attack Levels 3 and below, who should still be in Beginner Protection. I think this is because I recently upgraded to Level 4, and came out of Beginner Protection.

Another example; Some people were talking in WC, and one person claimed that he had been attacked even though he was still in BP, yet someone else who was also in BP tried to attack several people and was unable to. So it seems that people inside BP can not attack, but those outside BP can attack everyone.

Finally, when you try to move a city, it says, 'moving a main city costs 40 coins, moving a sub city costs 20 coins', yet when you go to move your main city, it says 'this will cost 20 coins,' yet it still charges you 40 coins.

That's all I got for now, but I'll post some more later, if I find any more..
 
Cheers,
~Ch@oS.

Return to Bug Report

Who is online

Users browsing this forum: No registered users and 0 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by ST Software for PTF.